Discover

Public procurement notices from official sources. Each one is checked again at the source before a report is delivered.

14 of 16 sources live

Contracts Finderupdated just now
TEDupdated just now
Find a Tenderupdated just now
Prozorroupdated 23 minutes ago
eTenders South Africaupdated 49 minutes ago
World Bankupdated 51 minutes ago
DGCPupdated 51 minutes ago
SECOP IIupdated 51 minutes ago
PNCPupdated 2 hours ago
DNCP Paraguayupdated 2 hours ago
Public Contracts Scotlandupdated 2 hours ago
EU Fundingupdated 2 hours ago
Grants.govupdated 2 hours ago
CanadaBuysupdated 4 hours ago
Mercado Públiconeeds an access key
SAM.govneeds an access key

11 open notices

Sort

2 notices close within 48 hours and are hidden, as there is rarely time to bid.
Results are mixed across countries so no single country fills the page. Pick the countries you serve to focus the list.

Laboratory and precision equipment
Benchtop Multiple Reactor Systems
CanadaNational Research Council of Canada (NRC)
Titre : Systèmes à réacteurs multiples de table Solicitation Number: 26-58202 Publication Date: October 27, 2026 Closing Date and Time: November 24, 2026, at 2:00 PM EST Trade Agreements: • Canadian Free Trade Agreement (CFTA) (formerly Agreement on Internal Trade [AIT]) • Canada-Chile Free Trade Agreement (CCFTA) • Comprehensive and Progressive Agreement for Trans-Pacific Partnership (CPTPP) • Canada-Colombia Free Trade Agreement (CCoFTA) • Canada-European Union Comprehensive Economic and Trade Agreement (CETA) • Canada–Honduras Free Trade Agreement • Canada–Korea Free Trade Agree
CanadaBuys source notice (opens in a new tab)Checked 4 hours agoSave
Value
Not stated
Closes
Buyer's deadline: 24 Nov 2026, 14:00 Eastern time (UTC−5). UTC: 24 Nov 2026, 19:00 UTC. CanadaBuys does not state a zone in its data. Its documentation uses Eastern time, so this is shown as Eastern time.
Laboratory and precision equipment
Tabletop X-Ray Film Digitizer
CanadaNational Research Council of Canada (NRC)
Titre : Numériseur de films radiographiques de table The National Research Council of Canada (NRC) requires the supply and delivery of one (1) tabletop x-ray film digitizer. This equipment will enable the laboratory to digitize x-ray films efficiently, improving workflow, accessibility, long-term digital archiving, sharing, and application for advanced damage detection using a machine-learning approach. The digitizer must be capable to meet ISO 14096 DS (digital storage) class requirement which allow digital archiving of film with an insignificant reduction of signal-to-noise-ratio and spatial
CanadaBuys source notice (opens in a new tab)Checked 4 hours agoSave
Value
Not stated
Closes
Buyer's deadline: 11 Nov 2026, 14:00 Eastern time (UTC−5). UTC: 11 Nov 2026, 19:00 UTC. CanadaBuys does not state a zone in its data. Its documentation uses Eastern time, so this is shown as Eastern time.
Laboratory and precision equipment
Raman Spectrometer System
CanadaNational Research Council of Canada (NRC)
Titre : Système de spectromètre Raman This requirement is for the delivery and commissioning of a Raman Spectrometer System and its accessories to the National Research Council (NRC) in Mississauga. All deliverables estimated to be received on or before 14 weeks after contract award. Solicitation of Offer Submission Eligibility: This solicitation of offers is subject to the Policy on Reciprocal Procurement. This means that only Canadian Suppliers and Suppliers of an Applicable Trading Partner, are eligible for this solicitation of offers. Offers submitted by Suppliers of a Non-Trading Part
CanadaBuys source notice (opens in a new tab)Checked 4 hours agoSave
Value
Not stated
Closes
Buyer's deadline: 12 Nov 2026, 14:00 Eastern time (UTC−5). UTC: 12 Nov 2026, 19:00 UTC. CanadaBuys does not state a zone in its data. Its documentation uses Eastern time, so this is shown as Eastern time.
Laboratory and precision equipment
Real Time Spectrum Analyzer
CanadaNational Research Council of Canada (NRC)
Titre : Analyseur de spectre en temps réel The National Research Council Canada has a requirement for the supply of a 1.2 GHz acquisition bandwidth real-time spectrum analyzer (26.5 GHz) to capture and stream in-phase and quadrature (I/Q) data. The real-time spectrum analyzer will be used in a reverberation chamber to qualify DUTs against very stringent telescope protection levels. To achieve this, a low-noise, ultra-sensitive real-time spectrum analyzer is required. The real-time spectrum analyzer will capture and stream I/Q data that is used to reconstruct complex time domain signals that ar
CanadaBuys source notice (opens in a new tab)Checked 4 hours agoSave
Value
Not stated
Closes
Buyer's deadline: 9 Nov 2026, 14:00 Eastern time (UTC−5). UTC: 9 Nov 2026, 19:00 UTC. CanadaBuys does not state a zone in its data. Its documentation uses Eastern time, so this is shown as Eastern time.
Laboratory and precision equipment
Purchase of two (2) Millimetre-Wave Frequency Extender Modules for a Vector Network Analyzers (VNAs) from 110 GHz to 170 GHz
CanadaNational Research Council of Canada (NRC)
Titre : Achat de deux (2) modules d’amplification de fréquence millimétrique pour un analyseur de réseau vectoriel (VNA) de 110 à 170 GHz NRC Herzberg Astronomy and Astrophysics (HAA) requires extended measurement capabilities in the millimetre-wave frequency range to support ongoing research in characterizing front-end components for low-noise receivers in radio astronomy. Existing Vector Network Analyzers (VNAs) at NRC HAA are currently limited to a maximum operational frequency of 116 GHz. To increase its measurement capability, NRC HAA intends to acquire frequency extender modules covering
CanadaBuys source notice (opens in a new tab)Checked 4 hours agoSave
Value
Not stated
Closes
Buyer's deadline: 9 Nov 2026, 14:00 Eastern time (UTC−5). UTC: 9 Nov 2026, 19:00 UTC. CanadaBuys does not state a zone in its data. Its documentation uses Eastern time, so this is shown as Eastern time.
Laboratory and precision equipment
Wheel Force Transducers and Unmanned Ground Vehicle
CanadaNational Research Council of Canada (NRC)
Titre : Transducteurs de force de roue et véhicule terrestre sans pilote The Department of National Research Council Canada has a requirement for the supply of: 2.1. Four (4) wheel force transducers (WFTs), acquisition modules, and accompanying hardware The wheel force transducers are required by the NRC to conduct terrain sensing and vehicle mobility research in Arctic environments. 2.2. One (1) Unmanned Ground Vehicle (UGV) for Offroad Robotics Research The required UGV will function as a configurable research platform for the development, integration, validation, and demonstration of te
CanadaBuys source notice (opens in a new tab)Checked 4 hours agoSave
Value
Not stated
Closes
Buyer's deadline: 9 Nov 2026, 14:00 Eastern time (UTC−5). UTC: 9 Nov 2026, 19:00 UTC. CanadaBuys does not state a zone in its data. Its documentation uses Eastern time, so this is shown as Eastern time.
Laboratory and precision equipment
Various equipment
CanadaNational Research Council of Canada (NRC)
Titre : Équipements divers The National Research Council Canada (NRC) has a requirement for the supply, delivery, installation (if applicable), and commissioning of multiple pieces of scientific and laboratory equipment to various NRC sites across Canada. The equipment will support NRC research activities and must meet the technical and performance specifications identified in the procurement documentation.
CanadaBuys source notice (opens in a new tab)Checked 4 hours agoSave
Value
Not stated
Closes
Buyer's deadline: 4 Nov 2026, 14:00 Eastern time (UTC−5). UTC: 4 Nov 2026, 19:00 UTC. CanadaBuys does not state a zone in its data. Its documentation uses Eastern time, so this is shown as Eastern time.
Industrial machinery
Robotic arms & linear actuator
CanadaNational Research Council of Canada (NRC)
Titre : BRAS ROBOTIQUES ET ACTIONNEUR LINÉAIRE The National Research Council Canada (NRC) needs to procure two robotic arms, one linear actuator and its auxiliary equipment to support laboratory automation tasks. This includes manipulation, testing, and assembly of medium sized components, as well as handling samples and parts in a controlled environment. The robotic arm will be used across various projects and applications at Clean Energy Innovation-Mississauga. All deliverables must be received no later than below: •12 weeks from the date of contract award.
CanadaBuys source notice (opens in a new tab)Checked 4 hours agoSave
Value
Not stated
Closes
Buyer's deadline: 4 Nov 2026, 14:00 Eastern time (UTC−5). UTC: 4 Nov 2026, 19:00 UTC. CanadaBuys does not state a zone in its data. Its documentation uses Eastern time, so this is shown as Eastern time.
Laboratory and precision equipment
Facet Coater
CanadaNational Research Council of Canada (NRC)
Titre : Systèmes de revêtement de facettes For over two decades, the Canadian Photonics Fabrication Centre (CPFC) at the National Research Council of Canada (NRC) has operated as a mission-critical facility supporting Canada’s photonics and semiconductor innovation ecosystem. The CPFC provides advanced fabrication and metrology services for both internal research programs and external clients, enabling the development and production of cutting-edge photonic devices used in telecommunications, sensing, and quantum technologies. Photonic devices are critical pieces of hardware for high-performa
CanadaBuys source notice (opens in a new tab)Checked 4 hours agoSave
Value
Not stated
Closes
Buyer's deadline: 16 Nov 2026, 14:00 Eastern time (UTC−5). UTC: 16 Nov 2026, 19:00 UTC. CanadaBuys does not state a zone in its data. Its documentation uses Eastern time, so this is shown as Eastern time.
Laboratory and precision equipment
Two High-Precision Direct Current (DC) Sources
CanadaNational Research Council of Canada (NRC)
Titre : Deux sources de courant continu (CC) de haute précision Title: Two High-Precision Direct Current (DC) Sources Solicitation Number: 26-58169 Publication Date: October 16, 2026 Closing Date and Time: November 5, 2026 at 14:00 EDT Trade Agreements: Canadian Free Trade Agreement (CFTA) (formerly Agreement on Internal Trade [AIT]) Region of Opportunity: Canada Region of Delivery: Canada (Ontario) GSIN: UNSPSC 41000000, L1-Laboratory and Measuring and Observing and Testing Equipment N6640 Notice Type: Request for Proposal (RFP) Tendering Procedure: Open Description: The National
CanadaBuys source notice (opens in a new tab)Checked 4 hours agoSave
Value
Not stated
Closes
Buyer's deadline: 5 Nov 2026, 14:00 Eastern time (UTC−5). UTC: 5 Nov 2026, 19:00 UTC. CanadaBuys does not state a zone in its data. Its documentation uses Eastern time, so this is shown as Eastern time.
Laboratory and precision equipment
Fast and High-resolution Oscilloscope
CanadaNational Research Council of Canada (NRC)
Titre : oscilloscope rapide haute résolution The objective of this Contract is to purchase a new Oscilloscope for the pulse measurement set-up used for characterization of quantum cascade lasers (QCLs). This oscilloscope will be used for pulsed-mode measurement set-up to extract the key parameters of lasers at cryogenic temperatures.
CanadaBuys source notice (opens in a new tab)Checked 4 hours agoSave
Value
Not stated
Closes
Buyer's deadline: 13 Nov 2026, 14:00 Eastern time (UTC−5). UTC: 13 Nov 2026, 19:00 UTC. CanadaBuys does not state a zone in its data. Its documentation uses Eastern time, so this is shown as Eastern time.

Showing 11 of 11

Keys: / search, j k move, Enter open, p preview